SECTION DIAGRAMS

MXON-M configuration:

The high-speed rotation of the rotor within the precisely adjusted stator (1) generates a powerful suction, directing the mixture from the suction (2) towards the impulse (3).

Inside, the centrifugal force directs the fluid towards the periphery of the body (4), where it is forced to pass through very narrow interstices at high speed.

The intense shearing, percussion and ultrasound guarantee the best dispersions, homogenizations and emulsions at the exit of the machine, thus maintaining a mixing and pumping cycle.

From the rear, the casing (5) closes the hydraulic cavity of the machine, allowing the passage of the shaft (6) and housing the mechanical seal (7).

The shaft mates with the motor shaft (8) and in some sizes includes a third support bearing (9).

The standard mechanical seal type is single or double execution balanced cartridge type.

MXON-H configuration:

The high-speed rotation of the rotor within the precisely adjusted stator (1) generates a powerful suction, directing the mixture from the suction (2) towards the impulse (3).

Inside, the centrifugal force directs the fluid towards the periphery of the body (4), where it is forced to pass through very narrow interstices at high speed.

The intense shearing, percussion and ultrasound guarantee the best dispersions, homogenizations and emulsions at the exit of the machine, thus maintaining a mixing and pumping cycle.

From the rear, the casing (5) closes the hydraulic cavity of the machine, allowing the passage of the shaft (6) and housing the mechanical seal (7).

The shaft is supported by oil-lubricated bearings sealed by seals (8, 9), mounted on a bearing support (10). The fixing legs are located under the body.

The standard mechanical seal type is single or double execution balanced cartridge type.